Automatic Transmission CV Axle Kit Right (Passenger) Side- German Joints with New Axle

Product code: KT-Autoaxleright
Introducing the Van Cafe rear drive axle for 80 thru 91 Vanagon with automatic transmission for the left (driver's) side. Engineered and manufactures to stock specifications, these axle shafts are des… Read more below
$269.85
Adding to cart… The item has been added

Introducing the Van Cafe rear drive axle for 80 thru 91 Vanagon with automatic transmission for the left (driver's) side. Engineered and manufactures to stock specifications, these axle shafts are designed to be a direct replacement for your old units. This axle will fit all 2wd with an automatic transmission left (drivers) side and is 570mm long. Axles on automatic vans are asymmetrical because of the shape of the transmission. Paired with new German Lobro joints, this kit comes with everything you need to replace the axle on one side of your van. Complete with the axle, (2) German joints, (2) boots, (12) bolts, and molybdenum grease. Some customers reused their serrated washers if they still have the concave property to them. If you don't want to deal with the mess or if your washers are worn out, and you need new ones, they are available here.

If you need the left (driver) side axle, please click here.

 

These axles have extensive testing in our shop Van that's running 165 horsepower, and we feel confident in their quality. We will warranty breakage of these axles in Vans up to 165 HP under normal driving conditions. Syncros have caused most axle breakage that we've seen over the years, with uprated motors lifting a wheel while offroading and overloading the opposite axle. We cannot extend the warranty to these situations.

Note: These axles are shipped in raw steel. We highly recommend proper finishing to maximize the longevity and aesthetic of your application. On the flip-side, you could be the first on your block to color match your axles to your van!

If you want to order this kit with the premium Rockford boot, please click here. Please click here for a kit with 944 cv joints that allow greater articulation of the axle.


Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!



Ref ID: LCVAAR

  • Description

    Introducing the Van Cafe rear drive axle for 80 thru 91 Vanagon with automatic transmission for the left (driver's) side. Engineered and manufactures to stock specifications, these axle shafts are designed to be a direct replacement for your old units. This axle will fit all 2wd with an automatic transmission left (drivers) side and is 570mm long. Axles on automatic vans are asymmetrical because of the shape of the transmission. Paired with new German Lobro joints, this kit comes with everything you need to replace the axle on one side of your van. Complete with the axle, (2) German joints, (2) boots, (12) bolts, and molybdenum grease. Some customers reused their serrated washers if they still have the concave property to them. If you don't want to deal with the mess or if your washers are worn out, and you need new ones, they are available here.

    If you need the left (driver) side axle, please click here.

     

    These axles have extensive testing in our shop Van that's running 165 horsepower, and we feel confident in their quality. We will warranty breakage of these axles in Vans up to 165 HP under normal driving conditions. Syncros have caused most axle breakage that we've seen over the years, with uprated motors lifting a wheel while offroading and overloading the opposite axle. We cannot extend the warranty to these situations.

    Note: These axles are shipped in raw steel. We highly recommend proper finishing to maximize the longevity and aesthetic of your application. On the flip-side, you could be the first on your block to color match your axles to your van!

    If you want to order this kit with the premium Rockford boot, please click here. Please click here for a kit with 944 cv joints that allow greater articulation of the axle.


    Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!



    Ref ID: LCVAAR