The Propex HeatSource HS2000 is a reliable and efficient
propane-fired, automatic thermostatically blown air heater that externally
vents that mounts inside the vehicle. Boasting 6500 BTU, it will pump
out plenty of heat for your cool-weather adventures. This heater features a
frugal 1.4 amp current consumption and onboard self-diagnostic hardware and
will give you worry-free, quiet comfort for years to come. The heater comes
complete with all hardware needed for installation in any vehicle, but it does
not include a connection to your fuel source. Instructions included. The heater
is covered by the manufacturer one year warranty from date of original purchase.
The HS 2000 is the
preferred heater for the Volkswagen Vanagon and, in particular, the Westfalia
model. If you have a van that is similar
in size to the Vanagon, this heater will work for you as well. Because the HS
2000 is so popular with the Vanagon, we produced an installation kit that will
enable you to divide the fuel from your propane tank between the stove, fridge,
and now your Propex heater. The Westy installation kit includes 1/4"
copper tubing, the four-way brass fitting, brass fitting to connect the
regulator to the four-way, and the compression fitting to connect the four-way
to the copper tubing. The copper tubing will connect to the 1/4"
compression fitting on the Propex Heater. The kit also includes clips and
screws to secure the copper tubing to a surface. Please click here to purchase
the installation kit. The preferred mounting location is underneath
the rear seat. Some Vanagon owners prefer to remove the rear heater core. If
you do as well, please click here for our rear heater core elimination kit.
If you are looking for a similar heater that mounts externally, please click
here for the HS2211.
NOTE: ALL PROPEX HEATERS NOW COME STANDARD WITH DIGITAL THERMOSTATS!
If you are looking for more information about
this product, please visit the Propex
Heat Source website or click on this brochure.
We also have some helpful Propex Installation
Tips found Here.
As with any electrical connection, we strongly
recommend using dielectric grease when mating the electrical connectors.
WHAT TO DO IF YOUR PROPEX MODEL IS OUT OF STOCK