New CV Axle Automatic Transmission Left (Driver) Side

Product code: 002977
For years, it's been impossible to get quality stock drive axle replacements for our Vans. Van Cafe searched high and low for a suitable axle and we were continually disappointed. So we decided to do … Read more below
$89.95
Adding to cart… The item has been added

For years, it's been impossible to get quality stock drive axle replacements for our Vans. Van Cafe searched high and low for a suitable axle and we were continually disappointed. So we decided to do something about it.

Introducing the Van Cafe rear drive axle for the VW Vanagon. Engineered and manufactured to stock specifications, these axle shafts are designed to be a direct replacement for your aging units. Pair them with German Lobro CV joints and you'll have a reliable, long-lasting solution for your Van.
This axle is for vans with an automatic transmission and fits the left (driver) side and is 522mm long (20.551"). Axles on automatic vans are asymmetrical because of the shape of the transmission. If you need the right (passenger) side axle, please click here
.

These axles have extensive testing in our shop Van that's running 165 horsepower and we feel confident in their quality. We will warranty breakage of these axles in Vans up to 165 HP under normal driving conditions. Most axle breakage that we've seen over the years has been caused by Syncros with uprated motors lifting a wheel while offroading and overloading the opposite axle. We cannot extend the warranty to these situations.

Note : These axles are shipped in raw steel. We highly recommend proper finishing to maximize the longevity and aesthetic of your application. On the flip-side, you could be the first on your block to color match your axles to your Van!


Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!

Ref ID: 877558

  • Description

    For years, it's been impossible to get quality stock drive axle replacements for our Vans. Van Cafe searched high and low for a suitable axle and we were continually disappointed. So we decided to do something about it.

    Introducing the Van Cafe rear drive axle for the VW Vanagon. Engineered and manufactured to stock specifications, these axle shafts are designed to be a direct replacement for your aging units. Pair them with German Lobro CV joints and you'll have a reliable, long-lasting solution for your Van.
    This axle is for vans with an automatic transmission and fits the left (driver) side and is 522mm long (20.551"). Axles on automatic vans are asymmetrical because of the shape of the transmission. If you need the right (passenger) side axle, please click here
    .

    These axles have extensive testing in our shop Van that's running 165 horsepower and we feel confident in their quality. We will warranty breakage of these axles in Vans up to 165 HP under normal driving conditions. Most axle breakage that we've seen over the years has been caused by Syncros with uprated motors lifting a wheel while offroading and overloading the opposite axle. We cannot extend the warranty to these situations.

    Note : These axles are shipped in raw steel. We highly recommend proper finishing to maximize the longevity and aesthetic of your application. On the flip-side, you could be the first on your block to color match your axles to your Van!


    Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!

    Ref ID: 877558