This seal fits in the channel on the body around the engine compartment that the engine lid seals against. It keeps road dirt and engine and exhaust vapors out of the interior of the vehicle.
FITMENT NOTE: This batch of seals may fit tight in the channel but they will work for all applications.
To Install:
- Remove old seal and all remnant adhesive from the channel.
- Run a thin line of weatherstrip adhesive in the center of the channel.
- Insert the seal taking care not to smear the adhesive in the inside of the van floor.
- Press and firmly tuck the seal into the channel all around the opening.
- Line up the engine lid in the forward body slots and let it rest on the new seal.
- Apply firm downward pressure on the lid (especially near the latch) and turn each latch into the locked position.
- The engine lid will be firm and tight until the seal relaxes which may take some time.
Ref ID: 251813133B
Complete your install with the products below
2.1L WBX Engine Compartment Wiring Harness (Sensors)
ID: 006943
In stock.
MSRP:
$224.95
Add to Cart
The item has been added
Single Cab Storage Compartment Seal
ID: 001956
In stock.
MSRP:
$49.95
Add to Cart
The item has been added
Single & Double Cab Engine Lid Strut
ID: 001955
In stock.
MSRP:
$19.95
Add to Cart
The item has been added
Driver's Side Middle Window Seal (All Years) And Sliding Door Glass Seal (80-84)
ID: 002475
In stock.
MSRP:
$44.95
Add to Cart
The item has been added
Sliding Door Seal
ID: 002275
In stock.
MSRP:
$194.95
Add to Cart
The item has been added
-
Description
This seal fits in the channel on the body around the engine compartment that the engine lid seals against. It keeps road dirt and engine and exhaust vapors out of the interior of the vehicle.
FITMENT NOTE: This batch of seals may fit tight in the channel but they will work for all applications.
To Install:
- Remove old seal and all remnant adhesive from the channel.
- Run a thin line of weatherstrip adhesive in the center of the channel.
- Insert the seal taking care not to smear the adhesive in the inside of the van floor.
- Press and firmly tuck the seal into the channel all around the opening.
- Line up the engine lid in the forward body slots and let it rest on the new seal.
- Apply firm downward pressure on the lid (especially near the latch) and turn each latch into the locked position.
- The engine lid will be firm and tight until the seal relaxes which may take some time.
Ref ID: 251813133B
-
Finish Your Project
Complete your install with the products below
2.1L WBX Engine Compartment Wiring Harness (Sensors)
ID: 006943 In stock.MSRP:$224.95Add to Cart The item has been addedSingle Cab Storage Compartment Seal
ID: 001956 In stock.MSRP:$49.95Add to Cart The item has been addedSingle & Double Cab Engine Lid Strut
ID: 001955 In stock.MSRP:$19.95Add to Cart The item has been addedDriver's Side Middle Window Seal (All Years) And Sliding Door Glass Seal (80-84)
ID: 002475 In stock.MSRP:$44.95Add to Cart The item has been addedSliding Door Seal
ID: 002275 In stock.MSRP:$194.95Add to Cart The item has been added